Recirculating Heaters and Chillers

E3500 Thermocirculator

The E3500 Thermocirculator is a low cost, portable water circulating system for supplying a constant temperature supply for closed and open loop applications at near ambient to +60°C.

Key Features

• Precise control of heating
• Compact
• Robust and reliable
• No running water to waste
• Ideal for use with the E3000 and E3100 Critical Point Dryers

Product Description

The E3500 is suitable for open and closed loop applications and has all controls and liquid connections on the front panel. The temperature controller shows not only the ‘set’ temperature (between ambient and +65°C), but also the actual liquid temperature. The fluid is circulated by a glandless magnetic pump, through an aluminium reservoir.

A cooling coil is mounted in the liquid reservoir. This coil can be directly connected to the main water supply and is primarily used when temperature control near to ambient is required. The electronic control system features a zero voltage switching unit which minimises mains electrical interference, enabling the E3500 to be used and sited with other sensitive electronic instruments.

Using the E3500 with critical point dryers

The E3500 will give controlled heating of E3000 and E3100 Critical Point Dryers. It is connected directly to the inlet and outlet of the E3000 or E3100 water jacket. The temperature of the circulating fluid is pre-set, typically set to 37°C (eg just above the critical temperature of carbon dioxide).

NB: For heating and cooling please see E4800 Recirculating Heaters/Chillers.

Additional Information

Specifications